Sarah Maria
- Stock #
- SF6258
- Year
- 1981
- Manufacturer
- Steveston Fiberglass
- Model
- Bristol Channel Cutter
- Engine
- Yanmar 3GM30F Inboard
- Hull
- Unknown
- Dimensions
- 28'x10'1"
- Price
$154,900 (CAD)
$110,227 (USD)
*Hull built in 1981, however vessel was finished and launched in 1991*
Bristol Channel Cutter, 28ft legendary off-shore sailing yacht, meticulously maintained by a marine professional with all the bells…
Bristol Channel Cutter, 28ft legendary off-shore sailing yacht, meticulously maintained by a marine professional with all the bells…
- Overview
- Vessel Name: Sarah Maria
- Model: Bristol Channel Cutter
- Manufacturer: Steveston Fiberglass, Vancouver, Canada
- Year Hull Built: 1981
- Year Launched: 1991
- Length Overall: 37'
- Length on Deck: 28'
- Beam: 10' 1" "
- Draft: 5'
- Vessel Location: Victoria, B.C.
- Head Room: 6'
- Power
- Engine: Yanmar 3GM30F Inboard
- H.P: 24
- Engine Hours: 2300
- Cooling: FWC
- Fuel Type: Diesel
- Fuel Consumption: 2.5 Liters per hour
- Tanks: 1
- Fuel Capacity: 50 Gallons
- Tank Material: Stainless Steel
- Cruising Speed: 5-6 Knots
- Full Speed: 7 Knots under full sails
- Shaft Type: Dripless New 2018
- Shaft Bearing: New shaft & bearing 2018
- Prop: Campbell Sailor 15.5"x7" RH bronze
- Engine Alarm
- Bilge Pumps: 3 (one manual, two electric)
- Engine serviced and inspected in 2024 - Gartside Marine (Report available upon request)
- Accommodations
- Sleeps: 4
- Stove: Dickenson Adriatic diesel stove with Origo stove top.
- Fridge: Icebox with Frigoboat Cold box and 12V compressor/plate.
- Galley Sink
- Head
- Sink
- Shower
- Water Tanks: 2x Stainless Steel
- Water Tank Capacity: 60 Gallons
- Hot Water Tank
- All interior cushion covers and foam replaced in 2025
- 4 exterior cushion covers and foam replaced in 2025
- Structural
- Decks: Teak glued over Fiberglass
- Hull: Solid hand laid Fiberglass
- Cabin/Superstructure: Teak over Fiberglass
- Full Keel
- Rudders: Outboard - Fiberglass
- Steering: Tiller
- Wind Vane Steering: A new custom-built Freehand Self Steering system from Anderson Boatyard (still in the crate) is waiting to be installed.
- Mast: Aluminum keel stepped, stripped and painted in 2018
- Standing Rigging: is 1x19 stainless wire with bronze turnbuckles.
- Anchor: Vulcan 15kg. Galvinized anchor w/ 250' of 5/16" chain. Rocna 6kg. stern anchor. Fortress FX23 aluminum anchor.
- Anchor Windlass: Lofrans Cayman 88 12V reversible windlass w/ foot switches and helm control. Dual bronze bow rollers on bowsprit.
- Zincs: 2025
- Anti-foul: 2025
- Hatches: 2
- Electronics
- GPS: Raymarine GPS, digital speed, depth and wind instruments
- VHF: IC-M59
- Auto Pilot: Pelagic tiller pilot
- Batteries: 4x 6V AGM deep cycle house (2022) 1x 12V 4D starting (2022)
- Accessories
- Canvas: Full all season
- Dodger
- Bimini
- BBQ
- Compass
- Barometer
- Stereo
- Rig/sail
- Rig type: Cutter
- Number of sails: 6 off-shore
- Main sails: Tanbark Dacron fully battened main with 2-point jiffy reefing and lazy jacks (240 sq.ft.)
- Jib/Genoas: Tanbark Dacron furling genoa (93%/320 sq.ft) Tanbark Dacron furling Yankee. Tanbark Dacron hank on Staysail (102 sq.ft. with separate sheet leads on the cabin top to bronze winches.)
- Spinnakers: Radial Head Drifter with snuffer sock and 15ft pole.
- Storm Sails: Storm Trysails (70 sq. ft)
- Winches: 2x Barient 21-33ST 2 spd bronze/self-tailing. 4x Barient 10 1 spd bronze, 2x Lewmar 16ST bronze.
Contact us
For further questions, please use the form below to contact us.